Lab Scissor Jack, Stainless Steel Jack Platform Lab Lift Stand Table

Raise R C trucks to work on

I use it for many tasks, such as if I��m marking with a very long level. It forms a base for one end of the level whilst I mark it.

Heavier then I expected and all things considered, happy with purchase!

Be careful and/or wear gloves when you unbox the scissors jack.The top and lower plates are made from stainless steel that was stamped (to form approximately 1/4" flanges on all sides of the plates). The edges of these plates, on the unit I received are razor sharp. Evidently, the punch / shear that formed the plates was not maintained and left nasty edges while forming.If you have a good file selection and 15-20 minutes of time to spare, the edges can be dressed and the jack will be safe to use. (I also hit them with steel wool after filing.)I would have rated it 5 stars without this issue.

Be careful and/or wear gloves when you unbox the scissors jack. The top and lower plates are made from stainless steel that was stamped (to form approximately 1/4" flanges on all sides of the plates). The edges of these plates, on the unit I received are razor sharp. Evidently, the punch / shear that formed the plates was not maintained and left nasty edges while forming. If you have a good file selection and 15-20 minutes of time to spare, the edges can be dressed and the jack will be safe to use. (I also hit them with steel wool after filing.) I would have rated it 5 stars without this issue.