The steps for using an Sealing Film are as follows:
1. Install the Cutter
Attach the cutter to the designated spot on the box, ensuring it is securely fixed for easy use during subsequent steps.
2. Feed the Sealing Film
Pull the sealing Film from the top opening of the box, and pull out an appropriate length of film as needed.
3. Cut the Sealing Film
After pulling out the desired length of film, smooth it out, then use the sliding cutter to trim it, ensuring a clean cut.
4. Peel off the Backing Paper
Start by gently peeling a corner of the backing paper from the pre-cut edge on the front of the film. Once the backing paper is peeled away, attach one side of the film to the bottle's opening, then simply peel off the rest of the backing.
5. Seal the Container
After peeling off the backing paper, gently stretch the film to ensure it tightly covers the container’s opening. Press the film firmly to make sure it is securely wrapped and properly sealed.
6. Complete the Seal
Once the film is applied, you can tear off any excess film, ensuring no air gaps at the seal, which will effectively protect your samples from external contamination.
By following these steps, you will be able to easily and efficiently use our self-developed laboratory sealing Film, ensuring the integrity and safety of your experimental samples.
Related Products:
|
 |
| Buy Now |