How to Use a Buchner Funnel? StonyLab

How to Use a Buchner Funnel?

 

A Buchner funnel is a type of laboratory funnel that is used for vacuum filtration. It consists of a funnel-shaped glass or porcelain funnel with a perforated plate called a Buchner plate or filter plate at the bottom, and it is commonly used in chemistry and biology labs for separating solids from liquids.

Here are the steps for using a Buchner funnel:

Choose the appropriate size of the Buchner funnel and filter paper. The filter paper should be slightly larger than the perforated plate at the bottom of the funnel.

Wet the filter paper with a small amount of the solvent to be used in the filtration. This helps to form a seal between the filter paper and the Buchner plate.

Place the Buchner funnel on top of a flask or vacuum flask. The flask should be large enough to hold the entire volume of the liquid to be filtered.

Turn on the vacuum pump or water aspirator to create a vacuum in the flask. This will draw the liquid through the filter paper and into the flask, leaving the solid material on top of the filter paper.

Carefully pour the liquid to be filtered into the Buchner funnel, making sure not to overflow the filter paper. Use a glass rod or spatula to help transfer the solid material to the funnel if necessary.

Once all of the liquid has been filtered, turn off the vacuum pump or aspirator and carefully remove the Buchner funnel from the flask.

Carefully remove the filter paper with the solid material and discard it appropriately. The liquid collected in the flask can be further processed or analyzed as needed.

Remember to wear appropriate personal protective equipment, such as gloves and goggles, when handling chemicals and performing laboratory procedures.

Back to blog